POWER CUTTER

Diamond wheel
Max cutting depth: 88 mm
Overload warning
Battery Cover
LED Light

THE 4-STROKE ADVANTAGE

• No Oil Mixing Which Simplifies Operation and Prevents Engine Failure Due to Improper Mix
• Eliminates the Need for Separate Mixed Oil/Fuel Can
• Lower Noise at 106.5 dB(A) anad Smoother Idle for Continuous Operation
• Lower Fuel Consumption at .45 Gallons Per Hour
• Reduced Exhaust and Intake Carbon Build-Up for Longer Cylinder Life
• Three Ring Piston for Improved Commercial Engine Durability

Mixing at any place
Mixer run time: 25 min
Blade: 165mm
Battery: BL1850B
Material: One liquid paint 4L
Rotation mode: Hi speed mode

Easier and faster sequential rebar tying.

Tying rebars automatically
Rebars can be tied automatically by only one hand in a various range of applications such as building concrete foundations.

High speed riveting as same as pneumatic tools.

Jaw case designed to enable tight space operation
The short center height allows for tight space operation such as close-to-wall riveting.

Rivet holding mechanism

• Once a rivet is installed, it is held in place and do not drop out even when the tool is directed downward.
• No need for holding the rivet by hand even in vertical down application

Transparent container for spent mandrels*
The amount of spent mandrels* can be checked.
* mandrel shaft broken off from a tightened rivet

Twenty 0.5W white-light LEDsdeliver bright and even light.

Carrying handle for easy transport that also serves as a hanging hook

High/Low/O ower switch

Knob for free adjustment of light angle enables the light source to rotate vertically through 360 ° in a desired direction.

AC cord can be stored around the hooks.

Can be mounted on:

• Optional Makita tripod for DML805
• Standard camera tripod

World’s First Cordless Portable Cut-off

Cutting work Amount
130cuts
75 x 45mm, T : 0.8mm metal stud with BL1850B x 2

“ One – Hand “ Cordless Rotary Hammer Series. Extremely compact & lightweight. Designed for ULTIMATE ease of use with power and speed